Stealth Cam FX SERIES, Инструкция по эксплуатации

Страница: 12 / 36

www.stealthcam.com Page
877-­‐269-­‐8490
12
CAMERA PROGRAMMING -­‐ CUSTOM (CONT
ADVANCED OPTIONS: To access the advanced options Press and Hold the ENTER button while in the
custom configuration settings. Alternatively to exit the advanced options Press and Hold the ENTER
button on any screen within the advanced options to return to the main menu.
FACTORY RESET – (NO default): This setting is used to reset the camera to its factory defaults.
With this option blinking, pressing the UP or DOWN arrow buttons will switch between the two
options of NO or YES. When the YES option is chosen and the ENTER button is press the camera
will default all configurations made up to this point. Once reset is completed the screen will flash
DONE and return to the
advanced
options menu.
DELETE SD CARD – (NO default): This setting is used to format the SD memory card installed. This
will also delete ALL FILES from the card. This is always recommended to do when a brand new
card is being used. With this option blinking, use the
UP or DOWN arrow key to move between the
options either YES or NO. When YES is chosen you will see the screen say dEL* * * , then DONE.
Once completed the screen will return back to the
advanced
options menu.