Staywell 917, Руководство пользователя

Страница: 2 / 16

100mm-150mm
(4"-6")
2. 1.
Measure the belly height of
your cat. This is usually
around 100-150mm (4"-6"). TOOLS REQUIRED
BEFORE INSTALLATION YOUR CAT FLAP PLEASE READ THE FOLLOWING STEP-BY-STEP INSTRUCTIONS CAREFULLY
168mm
(6 5 /
8
")
3.
Mark this measurement on
the outside of your door
and draw a straight
horizontal line 168mm (6
5 /
8
")
175mm
(6
7
/
8
")
168mm
(6 5 /
8
")
4.
Using the horizontal line as
the starting point, draw a
square 169mm x 169mm
(6
5 /
8
" x 6 5 /
8
")
5.
Drill holes at each corner.
6.
Cut along the lines using a
jigsaw
7.
Smooth out the rough edges.
8.
Remove the screw hole
blanking plugs by pushing
through from the reverse.
Place the cat flap in the hole
and mark the screw holes.
4.5mm
(
3
/
16
")
9.
Remove the cat flap and drill
the holes with a 4.5mm (
3 /
16
")
drill bit.
Screw into place and, if needed,
cut the screws down to size and
file to ensure no sharp edges.
Cover the screw holes with the
blanking plugs supplied to
ensure a neat finish.
Your Staywell cat flap is fitted with the red 4 way lock on the inside of your door.
2
10.
169mm
(6
5
/
8
")
169mm
(6 5 /
8
")