stayer TE35A, Руководство по эксплуатации

Страница: 6 / 36

OWNER’S MANUAL
main switch to the “0”position.
 Before changing speeds, stop the machine and wait until all
moving elements are completely brought to a halt.
 Do not ever leave the machine on without supervision. When
leaving the machine, check that the general switch is in the
“0”position and that moving elements are stopped.
 Check periodically the correct operating of all security controls
and elements of the machine.

Before pressing the starting pushbutton, set the drill protector
guard in the working position.
 Consider work area environment. Don’t use electric power driven
tools in damp or wet locations. Keep work area well lit. Don’t use
electric power tools in presence of flammable liquids or gases.
 Keep children away.

Use only such accessories and attachments as are
recommended in the operating instructions or the catalogue for
the power tool concerned.
2. FORESEEN USE OF THE MACHINE
The drilling machine was designed to be used with specific tools and
for certain machining operations.
The most common machining operation is the drilling of holes with
helicoidal drills. The drilling of hole is carried out by the combination
of a drill turning movement and a feed movement in the turning
spindle direction.
Besides the helicoidal drill, other tools can be used to drill holes.
There is a great variety of drill types and shapes in the market which
can be used on this machine, provided that they are designed for
such a purpose and that can be fixed in the spindle taper. They will
usually be the Morse taper or ISO type. The drill shanks should have
the corresponding taper to the spindle in which they are to be fitted,