stayer TE35A, Руководство по эксплуатации

Страница: 23 / 36

OWNER’S MANUAL
MACHINE CARE AND MAINTENANCE
Drilling machines are highly accurate machine tool designed to
operate around the clock if properly operated and maintained.
Machine must be lubricated and checked for adjustment before
operation. Improper lubrication or loose nuts and bolts can
cause excessive wear and dangerous operating conditions.
1. Check the machine prior to operation for any missing parts or
broken shear pins. Refer to the manual before attempting to
lift the machine.
2. Newly installed machine should be properly leveled before any
operation to prevent vibration and wobble.
3. When the machine is transported out of a normal shop
environment should be protected from dust, excessive heat,
and very cold conditions.
4. Change the lubricant frequently if working in dusty conditions.
5. In hot working areas, use care to avoid overheating the motor
of damaging any seals.
6. Operate the machine at slower speeds than normal when
working in cold environments.
7. During the operation, the chips that fall onto the table surface
should be cleaned timely.
8. After the operation every day, eliminate all the chips and clean
different part of the machine tool and apply machine tool oil
to prevent rusting.