stayer LOM 230, Руководство по эксплуатации

Страница: 6 / 8

gb
- 6 -
defects and loses its validity if the returned tool or pie-
ces were manipulated, dismantled or repaired outside
the factory.
The warranty also expires if the tool was used in an
inappropiate way or if unsuitable unexpected by the
manufacturer accesories were used.
All the transportation and dismantling costs will be at
the client's expense.
The client acquires the compromise of easening our
technician's task by providing every detail and descrip-
tion of the tool anomalies detected during its usage.
5_NORMATIVE MARKING
TECHNICAL SPECIFICATIONS
W
rpm
= Rated input power
= No-load spins
= Plate
= Mass
Typical noise levels in evaluation A:
L
PA
= Acoustic pressure level
L
WA
= Acoustic power level
= Acceleration typically evaluated in the hand/
arm
The noise level when working can exceed 85 dB (A).
The values given are valid for nominal voltages
[U] 230/240 V ~ 50/60 Hz - 110/120 V ~ 60Hz. For
lower voltage and models for specific countries, these
values can vary. Please observe the article number on
the type plate of your machine. The trade names of the
individual machines may vary.
We reserve the right to change related to technical
advance.
EC DECLARATION OF CONFORMITY
The undersigned:
STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: +34 902 91 86 81 / Fax: +34 91 691 91 72
CERTIFIES
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardized documents: EN 60745-1, EN 60745
2-3, EN 55014-1, EN 55014-2, EN 61000-3-2, EN
61000-3-3 according to EU Regulations 2006/42/EC,
2014/30/EU, 2011/65/EU.
Ramiro de la Fuente
Director General
January 2019