35
12 Welding
©Walter Stauffenberg GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
12.4 Performing the Welding Process
First set the necessary welding parameters.
Read and observe here point
12.3 „Setting the Welding Parameters“
.
Electric shock and light arc hazard
Never touch the welding elements, chuck, retaining nut or electrically
conductive parts in their vicinity during the welding process.
These parts are live.
Never wear metal jewellery, even a wristwatch, on your body during the
welding process.
This will help to avoid injuries and damage due to electric power or
electromagnetic fields.
Electric shock and light arc hazard
Stand on an insulated mat if you have to weld under the following
conditions:
–
In confined spaces with electrically conductive walls
– Under cramped conditions between or against electrically conductive
parts
– Where there is limited mobility on electrically conductive parts
– In damp, wet or hot rooms.