MPR31
1
1
1
2
2
2
B
C
A
E
D
3
WARNING !
Read and understand all instructions.
Failure to follow all instructions listed below, may result
in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA
• Keep your work area clean and well lit.
Cluttered benches and dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust.
Power tools create sparks
which may ignite the dust or fumes.
• Keep by-standers, children, and visitors away while operating a power
tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Before plugging in the tool, be certain the outlet voltage supplied is within
the voltage marked on the nameplate.
Do not use “AC only” rated tools with a
DC power supply.
• Avoid body contact with grounded surfaces such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if your
body is grounded. If operating the power tool in damp locations is unavoidable,
a Ground Fault Circuit Interrupter must be used to supply the power to your tool.
Electrician's rubber gloves and footwear will further enhance your personal
safety.
• Don't expose power tools to rain or wet conditions.
Water entering a power
tool will increase the risk of electric shock.
•
Do not abuse the cord.
Never use the cord to carry the tools or pull the plug
from an outlet. Keep cord away from heat, oil, sharp edges or moving parts.
Replace damaged cords immediately. Damaged cords increase the risk of
electric shock.
• When operating a power tool outside, use an outdoor extension cord
marked "W-A" or "W".
These cords are rated for outdoor use and reduce the
risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use tool while tired or under the influence
of drugs, alcohol, or medication.
A moment of inattention while operating
power tools may result in serious personal injury.
• Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts.
Loose
clothes, jewelry, or long hair can be caught in moving parts. Keep handles
dry,
clean and
free from oil and grease.
1. POWER TOOL SAFETY RULES
POWER TOOL SAFETY RULES