Status Instruments sv1000, Руководство пользователя

Страница: 21 / 36

21
1.3. TIME INTERVALS FOR USING STATUS SV1000
For the proper operation of the machi-
ne there should be at least a 20-se-
cond time interval between individual
cycles of sealing or vacuum packing.
When the cycles follow each other too
quickly, the machine automatically
stops. The Overheating indicator is lit
( Item 4 in Figure 1 ).
Wait for the machine to cool down
(approximately 30 minutes). When the
Overheating indicator goes off, you
can carry on using the machine as
normal.
While the machine is cooling down, do
not unplug it.
1.4. MAINTENANCE AND CLEANING
a.) Unplug the machine.
b.) Use a soft, damp cloth to clean
the machine. Do not use anything
which could scratch or damage the
surface. Never submerge the ma-
chine in water or place it under run-
ning water. Never squirt detergent
directly onto or into the machine.
c.) Before using the machine make
sure that it is completely dry.
d.) The Sealing Strip is covered with
Teflon. Remove any plastic residu-
es using a soft cloth.
e.) You can only clean the Sealing
Strip when the machine has cooled
down. Never try to clean the sea-
ling strip using a sharp object.
f.) If the black foam seals become
contaminated with grease or liquid,
then you can wash them in soapy
water, rinse and dry them before
replacing them. This will increase
the lifespan of the foam seals.