15
a) Position the PROwatt 250 as far as possible from the televi-
sion, the antenna and the antenna cables. Use an extension
cord to move the PROwatt 250 away from the television.
b) Adjust the orientation of the PROwatt 250, the antenna ca-
bles, and the TV power cord to minimize interference.
c) Make sure that the antenna feeding the television provides an
adequate (“snow free”) signal and that high quality, shielded
antenna cable is used.
These measures will usually improve the situation. If they do
not, you may wish to try a different make of TV set or an an-
tenna that can provide a stronger signal. Experience has shown
that different models of TV sets vary in their susceptibility to
interference.
5.2 Troubleshooting guide
Problem: Lack of power output
Possible cause
Suggested remedy
Poor contact with lighter.
Clean lighter thoroughly.
Replace outlet if necessary.
Spread contacts on lighter
plug.
Automotive electrical
Turn ignition key to access-
system requires ignition
ory position.
to be on.
