10
3.3 Connection to load
The PROwatt 250 is equipped with a standard AC receptacle.
Plug the cord from the equipment you wish to operate into this
receptacle.
CAUTION: DO NOT CONNECT TO AC DISTRIBUTION
WIRING
The PROwatt 250 is designed to be directly connected to stan-
dard electrical and electronic equipment in the fashion described
above. Do not connect the PROwatt 250 to household or RV
AC distribution wiring. Do not connect the PROwatt 250 to
any AC load circuit in which the neutral conductor is connected
to ground (earth) or to the negative of the DC (battery) source.
CAUTION: RECHARGEABLE APPLIANCES
Certain rechargers for small nickel cadmium batteries can
be damaged if connected to the PROwatt 250. Two particu-
lar types of equipment are prone to this problem:
1) Small battery operated appliances such as flashlights, razors,
and night-lights that can be plugged directly into an AC re-
ceptacle to recharge.
2) Certain battery chargers for battery packs used in hand power
tools. These chargers will have a warning label stating that
dangerous voltages are present at the battery terminals.
Do NOT use the PROwatt 250
with the above equipment.
