STATESMAN ECH30TC, Инструкция по эксплуатации, Страница: 8 / 15

USING YOUR CERAMIC HOB
To Start Cooking
After power is on, the buzzer beeps once, all the indicators light up for 1 second then go out,
indicating that the ceramic hob has entered the state of standby mode.
1. Touch the ON/OFF control. All the indicators show “-”
2. Place a suitable pan on the cooking zone that you
wish to use.
Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry
3. Touching the heating zone selection control
4. Select a heat setting by touching the “-” or “+” control.
If you don’t choose a heat setting within 1 minute, the
ceramic hob will automatically switch off. You will need
to start again at step 1.
You can modify the heat setting at any time
during cooking.
By holding down either of these buttons, the value
will go up and down.