Statesman Electric Water Heater Model Number Break Down
Premium Heavy Duty Electric Water Heater
Printed in U.S.A.
EC/SSE/1004
©2004 State Water Heaters
In keeping with our policy of continuous product improvement,
specifications are subject to change without prior notice.
COMMERCIAL
The Expert’s Choice
®
500 Lindahl Parkway, Ashland City, TN 37015 • www.stateind.com
SUGGESTED SPECIFICATIONS
The heater shall be a glass-lined Statesman Premium commercial electric model No.____________________ as manufactured by State Water Heaters. Heater should
be rated at _______ KW, _______ volts, _______ phase, 50/60 cycle AC and constructed in accordance with ASME Code, shall bear appropriate symbol and be listed
with the National Board as required. Heater shall be listed with Underwriters’ Laboratories and approved by National Sanitation Foundation. All internal surfaces of the
tank shall be glass-lined with an alkaline borosilicate composition that has been fused-to-steel by firing at a temperature of 1600°F. Tank shall be cathodically protected
with adequate extruded magnesium rod. The entire vessel is to be enclosed in a round steel enclosure with baked enamel finish. Control compartment to be hinged and
shall house 120 volt control circuit transformer, transformer fusing, magnetic contactor(s), immersion style operating thermostat(s), high limit thermostat(s), element
fusing per N.E.C., and commercial grade incoloy sheathed flange mounted elements with prewired terminal leads. Temperature controls include limiting switch which
will require resetting manually in the event the temperature reaches 190°F. Foam insulation shall exceed latest requirements of ASHRAE 90.1-1999 for heat loss
efficiency. Heater shall include ASME T & P relief valve and drain valve.
Immersion
Thermostats
State Statesman
Electric
Fused
Gallon Capacity
KW
Three Year Warranty
S
S
E
5
0
6
0
I
F
E
