State Water Heaters SEH-200 Скачать руководство пользователя страница 18

18

EConoMy ModE sEttInGs

daily operating Mode settings

ACTION

DISPLAY

Economy Mode all day

:

From the Economy Mode Setup menu use the Up/Down buttons to 

select (highlight in black) the Daily sub menu for “Sun.” Press the 

Operational Button underneath “CHANGE” to enter this menu.

Use the Up/Down buttons to select (highlight in black) the “Economy 

Mode All Day” setting.

Press the Operational Button underneath “SELECT” to change from 

the factory default Normal Operation All Day setting to the Economy 

Mode All Day setting.

Press  the  Operational  Button  underneath  “BACK”  to  confirm  the 

new setting and update the control system. You will be returned to 

the Economy Mode Setup menu. The new setting should now be 

displayed for Sun.

normal operation Between

:

From  the  Economy  Mode  Setup  menu  Use  the  Up/Down  and 

CHANGE buttons to enter the Mon sub menu as described above.

Use the Up/Down buttons to select (highlight in black) the “Normal 

Operation  Between”  setting.  Press  the  Operational  Button 

underneath “SELECT” to change the operating mode for Monday to 

Normal Operation Between. Note that when this setting is selected 

Start and Stop time user settings appear on the display.

Use the Up/Down buttons to navigate between the Start and Stop 

time Hour, Minutes and AM/PM settings.

With each item selected press the Operational Button underneath 

“CHANGE” to activate the adjustment mode for each setting. Use 

the Up/Down buttons to change the value to the desired setting.

Press  the  Operational  Button  underneath  “ACCEPT”  to  enter  the 

new setting or “CANCEL” to discard the new setting and retain the 

previous setting.

Press the Operational Button underneath “BACK” when finished to 

confirm the new settings and update the control system. The display 

will return to the Economy Mode Setup menu with the new settings 

shown for Mon.

Содержание SEH-200

























Отзывы: