background image

3

SAFE INSTALLATION, USE AND SERVICE

Your safety and the safety of others is extremely important in the installation, use and servicing of this water heater.
Many safety-related messages and instructions have been provided in this manual and on your water heater to warn you and 

others of a potential hazard.  Read and obey all safety messages and instructions throughout this manual.  It is very important 

that the meaning of each safety message is understood by you and others who install, use or service this water heater.

All safety messages will generally tell you about the type of hazard, what can happen if you do not follow the safety message 

and how to avoid the risk of injury.
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of 

substances known to the State of California to cause cancer, birth defects, or other reproductive harm, and requires businesses 

to warn of potential exposure to such substances.
WARNING:  This product contains a chemical known to the State of California to cause cancer, birth defects, or other 

reproductive harm. 
This appliance can cause low-level exposure to some of the substances included in the Act.

IMPORTANT DEFINITIONS

•    Qualified Technician:  

A qualified technician must have ability equivalent to a licensed tradesman in the fields of 

plumbing, air supply, venting, and gas supply, including a thorough understanding of the requirements of the National 

Fuel Gas Code as it relates to the installation of gas fired water heaters.  The qualified technician must also be 

familiar with the design features and use of flammable vapor ignition resistant water heaters, and have a thorough 

understanding of this instruction manual.

•  

Service Agency:

 A service agency also must have ability equivalent to a licensed tradesman in the fields of 

plumbing, air supply, venting and gas supply, including a thorough understanding of the requirements of the National 

Fuel Gas Code as it relates to the installation of gas fired water heaters. The service agency must also have a 

thorough understanding of this instruction manual, and be able to perform repairs strictly in accordance with the 

service guidelines provided by the manufacturer.

•  

Gas Supplier:

 The Natural Gas or Propane Utility or service who supplies gas for utilization by the gas burning 

appliances within this application. The gas supplier typically has responsibility for the inspection and code approval of 

gas piping up to and including the Natural Gas meter or Propane storage tank of a building. Many gas suppliers also 

offer service and inspection of appliances within the building.

This is the safety alert symbol.  It is used to alert you to potential personal injury hazards.  Obey all safety 

messages that follow this symbol to avoid possible injury or death.

DANGER

DANGER indicates an imminently hazardous situation which, if not avoided, could 

result in death or injury.

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, could 

result in death or injury.

CAUTION

CAUTION  indicates a potentially hazardous situation which, if not avoided, may 

result in minor or moderate injury.

CAUTION

CAUTION used without the safety alert symbol indicates a potentially hazardous 

situation which, if not avoided, could result in property damage

SAFETY PRECAUTIONS

Flammable Vapors

FLAMMABLES

FIRE AND EXPLOSION HAZARD

Can result in serious injury or death

           Do not store or use gasoline or other

 

flammable vapors and liquids in the vicinity of this 
or any other appliance. Storage of or use of

 

gasoline or other flammable vapors or liquids in the 
vicinity of this or any other appliance can result in 
serious injury or death.

Read and follow water heater warnings and instructions.

WARNING

Содержание 186489-002





































Отзывы: