44
www.starwincom.com
Tel: +8629-88664381, E-mail: [email protected]
Figure 7-12
Figure 7-13
Figure 7-14
8.
If you need to disconnect, click the three dots on the upper right corner and select "Disconnect
device", then click the “Ok”, as shown in Figure 7-16.
9.
Adding Satellite:
Click on the three dots in the upper right corner, then click “Management Center”,
“Satellite management” in turn, APP has built in the frequently-used satellite,
If there are target satellite, you just check the circle front the satellite, as shown in Figure 7-17.
If there are not the target satellite, click the "+" on the upper right corner to enter the satellite add
interface, as shown in Figure 7-18, enter the satellite name and satellite longitude, click "SAVE" to
complete the addition, then return to the previous step, check the newly added satellite and it will
appear in the satellite selection list, as shown in Figure 7-19 and 7-20.
