ROBOHEAD X-3 LED
10
www.thomann.de
System reset
Load defaults
Maintenance and care
Cleaning frequency depends on the environment in which the fixture
operates: damp, smoky or particularly dirty surrounding can cause greater
accumulation of dirt on the fixture’s optics.
•
Never submerse the device in water or any other liquid. Don‘t let any
liquid get into the housing. This would damage the unit and cause a
short circuit.
•
Before cleaning the device you must disconnect it from the mains.
Clean the surface of the device only with a slightly damp cloth. Never
use petrol, solvents or any aggressive cleaners! These could damage
the surface of the unit‘s housing!
•
Use a dry soft cloth to clean the fan and the lens periodically. So you
will maintain good ventilation and an optimal illumination effect.