6
5. Beam Angle
XH-1
XH-2
XH-3
Distance: 5 m,
illuminated area:
8.5 m × 5 m
Distance: 5 m,
illuminated area:
9 m × 5.2 m
Distance: 5 m,
illuminated area:
9 m × 5 m
Distance: 5 m,
luminance: 80 lux
Distance: 5 m,
luminance: 70 lux
Distance: 5 m,
luminance: 50 lux
XH-I is best to be placed 5 meters from wall, and from this distance the
light effect will cover an area of 8.5 m x 5 m.
XH-2 is best to be placed 5 meters from wall, and from this distance the
light effect will cover an area of 9 m x 5.2 m.
XH-3 is best to be placed 5 meters from wall, and from this distance the
light effect will cover an area of 9 m x 5 m.
6. Troubleshooting
Problem Probable cause(s)
Suggested remedy
No light
No power to the fixture
Check power connections
Blown fuse
If power is applied but does not
light, please check and replace
fuse if necessary.
Burned out lamp
Install new lamp.
Fixture too hot
Allow to cool down. Improve air
flow around the unit.
No action Sound too low to activate
control circuit
Increase volume.
Electrical malfunction
Refer to service technician.
7. Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be
carried out periodically to optimise light output. Cleaning frequency de
-
pends on the environment in which the fixture operates: damp, smoky or
particularly dirty surroundings can cause higher accumulation of dirt on the
unit’s optics.
• Clean with soft cloth using normal glass cleaning fluid.
•
Always dry the parts carefully.
• Clean the external optics at least every 20 days. Clean the internal op
-
tics at least every 30/60 days.
