3
1. Safety Instruction
You have to carefully read the instruction, which includes impor-
tant information about the installation, usage and maintenance.
•
Please keep this User Guide for future consultation. If you sell the unit
to another user, be sure that he also receives this instruction booklet.
•
Unpack and check carefully there is no transportation damage before
using the unit.
•
Before operating, ensure that the voltage and frequency of power sup-
ply match the power requirements of the unit as stated in this manual.
•
It’s important to ground the yellow/green conductor to earth in order to
avoid electric shock.
• The unit is for indoor use only. Use it only in a dry location. Exposing the
device to rain or moisture would cause the risk of electrical shock or fire.
•
The unit must be installed in a location with adequate ventilation, at
least 50 cm from adjacent surfaces. Be sure that no ventilation slots are
blocked.
•
Disconnect the device from the mains power before any servicing or
maintenance.
•
Replace fuse/lamp only with the same type. Do not use any other type
of lamp.
• Keep any flammable material away from the unit while it is operating.
Otherwise you run the risk of causing a fire.
• Use safety cables when fixing this unit. Don’t handle the unit by taking
its head only, but always by taking its base.
• Maximum ambient temperature is TA: 40°C. Don’t operate it where the
temperature is higher than this.
• Unit surface temperature may reach up to 85°C. Don’t touch the hous
-
ing barehanded during its operation. Turn off the power and allow about
15 minutes for the unit to cool down before replacing bulb or servicing
as the unit could be very hot. Also don’t touch the bulb with bare fingers,
as it is very hot after using.
• Hot lamp explosion hazard! Do not open the unit within five minutes af
-
ter switching off.
•
Do not start the unit without bulb enclosure or if the housing is damaged.
• The housing, the lenses, or the ultraviolet filter must be replaced if they
are visibly damaged.
•
In the event of serious operating problem, stop using the unit imme-
diately. Never try to repair the unit by yourself. Repairs carried out by
