STARVILLE DMX-Master I, Руководство пользователя

Страница: 49 / 68

1.
Enabling programming mode.
2.
Simultaneously press [FINE] and [MODE] . The LED [REVERSE] lights up and thus indicates
that the device is in Reverse mode.
3. With [BANK UP/DOWN] you can switch between Pan and Tilt.
4. Press [TAP/DISPLAY] to switch between 8-channel and 16-channel mode.
5.
Use one of the [SCANNERS] buttons to select the desired scanner.
6.
If necessary, you can use [PAGE SELECT] to switch between levels Page A and Page B.
7. While you keep [MODE] pressed, press the [SCENES] button. All LEDs should flash briefly
and thus indicating that the DMX channel has been reversed. The button [SCENES] 1
stands for DMX channel 1, [SCENES] 2 for DMX channel 2 and so on.
8. Repeat steps 3 - 7.
8-channel mode: You can assign the PAN / TILT movement for 24 scanners. In 8-channel
mode, you can save PAN / TILT for page A and page B.
16-channel mode: You can assign the PAN / TILT movement for 12 scanners. In 16-
channel mode, you can save PAN / TILT only for page A or page B.
Reversing channels
Operating
DMX-Master I, DMX-Master MK II ENC
49