STARVILLE DMX-Master I, Руководство пользователя

Страница: 35 / 68

8.3 Programming scenes
1. Enabling programming mode.
2.
Press one of the
[SCANNERS]
buttons to turn on the Fader control for the corresponding
scanner. The lighting LED indicates this. You can select several scanners at the same time
by pressing their [SCANNERS] buttons. So you can set several scanners at once.
3.
If using a dimmer, use the faders to set the desired dimmer intensity. With the DMX
Master MK-II ENC, you can also use the two encoder wheels to control the Pan or Tilt
movements of the scanners.
4.
If desired, you can use [PAGE SELECT] to switch to the second level to programme chan‐
nels 9 - 16.
5. Once all settings are done press [MIDI/REC] to save the scene.
6.
Use the buttons [BANK UP/DOWN] to select the desired bank in which you want to save
the scene. 30 banks with each eight memory locations are available.
7.
To save the scene to the desired location, press the corresponding [SCENES] button (1 -
8). All LEDs and the display will flash three times, indicating that the scene has been
saved. Then the display shows Bank and Scene.
Operating
DMX-Master I, DMX-Master MK II ENC
35