34
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Command List
The following is a list of commands that you can use through a
computer’s command line to control
Matrix Switch
functions:
Notes:
All commands must be followed by pressing the
Enter
button in order to execute the command.
Commands are not case-sensitive.
Commands also work with RS232 (serial).
Command
Description
A N
Switch Output A to Input N (N = 1 - 4)
B N
Switch Output B to Input N (N = 1 - 4)
C N
Switch Output C to Input N (N = 1 - 4)
D N
Switch Output D to Input N (N = 1 - 4)
I N
Switch all Outputs to Input N (N = 1 - 4)
AB....N
Switch outputs AB to Input N (N = 1 - 4)
SETIP xxxx.
xxxx.xxxx
Setting IP, Subnet, Gateway, for a Static IP (x
= 0 - 255)
IPCONFIG
Displays the current IP Configuration
RSTIP
Sets the IP configuration to DHCP mode
P0
Powers the Switch Off
P1
Powers the Switch On