Instruction Manual
5
Step 3
Press 1 or 2 within 3 seconds to select Source 1 or Source 2. After selecting, LED 4 will
become either red or orange.
•
Red means Source 1 is selected
•
Orange means Source 2 is selected
Step 4
Repeat Step 1 through 3 to route other ports.
Remote Control Operation
Using the included external sensor, the user has two methods of achieving remote
control of the unit within a range of 5 meters. Without the external sensor connected
to the unit, the remote control communicates with the internal sensor. Conversely,
when the external sensor is connected to the unit, the internal sensor is disabled.
Remote controlling is achieved through communication between the remote and the
external sensor.
Setting Monitor Routes
Route Source 1 or 2 to Monitors 1 through 4 repsectively
Step 1
Press the desired port (ie. 4).
Step 2
Press S1 or S2 to route Source 1 or Source 2 to Monitor 4.
Step 3
Repeat Step 1 and 2 to route other ports.
Optional:
If you would like to turn the video or audio ports ON or OFF, you may do so
by pressing the video and audio buttons.
