StarTech.com USB6N1DOCKGB, Руководство пользователя

Страница: 28 / 34

- Page 26 -
Host Link on Other Computer
Step1
：
Power on both computers where you will connect the PC-Linq cable and make
sure that the USB port is enabled and working properly.
Step2
：
Plug in the USB cable into the USB port and Windows will detect an unknown
device and run the Add New Hardware Wizard to assist you in setting up the
new device.
Step3
：
Insert the PC-Linq USB cable driver diskette into the floppy drive and click Next to
continue.
Step4
：
Select Search for the best driver for your device and click Next .
Step5
：
Select Floppy disk drives and click OK .
Step6
：
Windows will detect the driver and shows the USB Bridge Cable . Click NEXT to
continue installation.
Step7
：
Then the PC-Linq Setup program will start to begin program installation.
Step8
：
Follow the instructions on every dialog box to finish the installation.
Step9
：
After installation is complete, a shortcut of the PC-Linq program will be placed on
your Windows desktop.