13
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2.
Connect an
HDMI Cable
to the
HDMI Port
on the
Receiver
and connect the other end to an HDMI port on the
Display
Device
.
3.
Connect the
Universal Power Adapter
to the
Power Port
on the
Transmitter
and the other end into an
AC Electrical
Outlet
.
LAN Connection
•
When using a LAN Connection connect the
Transmitter
and
Receiver
the same you would when connection point
to point. However, instead of connecting the
Transmitter
to
the
Receiver
you would connect both the
Transmitter
and
Receiver
to a
LAN Device
(switch, router, etc.) using a
CAT
5e/6 Cable
.
•
When using a LAN connection you must manually assign an
IP Address to the Transmitter and Receiver. See
and the
sections
for further information.
Note:
Your router must support IGMP snooping and Jumbo
Frames. Please refer to your network switch or router docu-
mentation to ensure IGMP snooping and Jumbo Frames are
supported and enabled.
