18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
EDID
If you are unable to achieve maximum resolution on your
connected
Display Devices
or a connected
Display Device
is
not detected.
1.
Press and hold the
EDID Copy Button
next to the
Console
HDMI Port
for the
Display Device
you want to use to copy
EDID settings from, for 18 seconds.
2.
Release the
EDID Copy Button
once the
Power LED
starts
to flash quickly. The
Power LED
will flash 3 times indicating
that it has successfully reset the EDID settings.
3.
Power cycle the
KMV Switch
. Disconnect all USB cables from
the
KVM Switch
. Disconnect the
Universal
Power Adapter
from the
KVM Switch
, wait 60 seconds and Reconnect the
Universal Power Adapter
to the
KVM Switch
.
If the
KVM Switch
looses EDID settings when switching ports
and cannot detect the
Display Device
.
1.
Press and hold the
EDID Copy Button
next to the
Console
HDMI Port
for the
Display Device
you want to use to copy
EDID settings from, for 6 seconds.
2.
Release the
EDID Copy Button
once the
Power LED
starts
to flash. The
Power LED
will flash twice indicating that it has
successfully copied the EDID settings from the connected
Display Device
.
