7
To select the previous or the next computer, press <UP> or <DOWN>
arrow keys. To abort the Manual Scan, press any other key.
Scan Time
Four options are available for users to set the Scan Time duration, it
Includes 3, 8, 15 and 30 seconds.
Note:
Scan Time is set to 3 seconds by default.
To adjust Scan Rate, set the scan time of duration before switching to
the next computer:
Left <CTRL> + Left <CTRL> + <F3>
The KVM Switch generates 1 to 4 beeps indicating a scan time
duration for 3, 8, 15 or 30 seconds respectively.
USB-Port Rule
There are two settings for USB-Port Rule: ON or OFF.
When set to ‘ON’, the USB Hub port follows computer selection.
When set to ‘OFF’, the USB Hub port stays on the currently selected
PC port.
SV231DD2DUA:
press the hotkey below to turn ON/OFF the USB-Port
Rule for USB 1 and USB 2:
Left <CTRL> + Left <CTRL> + <F7>
SV431DD2DUA:
USB 1: press the hotkey below to turn ON/OFF the USB-Port Rule:
Left <CTRL> + Left <CTRL> + <F7>
USB 2: press the hotkey below to turn ON/OFF the USB-Port Rule:
Left <CTRL> + Left <CTRL> + <F8>
To change the PC port that the USB hub stays on to the currently
selected PC port, press the following hotkey:
Left <CTRL> + Left <CTRL> + <U>
NOTE:
Please make sure that installation of the USB device has been
accomplished before switching to the next computer.
