manualshive.com logo in svg

StarTech.com STNDMTV70, Руководство по установке

Поделиться
Скачать
StarTech.com STNDMTV70 Скачать руководство пользователя страница 36

Instruction manual

30

3.  Repeat step 2 until the weight of the TV is counterbalanced.
Note: When the weight of the TV is properly counterbalanced, the TV will remain 

stationary on the column when you loosen your hold on it, and you will be able to 

move the TV up or down the column with minimal effort.
4.  When the weight of the TV is counterbalanced, move the TV to the desired height.
5.  Pull the pin and turn it to the locked position.
6.  To make sure that the pin is properly aligned in one of the holes in the spool, pull 

up or push down on the TV. You may hear a clicking sound as the spring-loaded pin 

goes into a hole and prevents the spool from rotating.

When the pin is aligned in one of the holes and the TV is locked in a vertical position, 

the TV shouldn’t move when you pull up or push down on it.
Caution! If the pin is misaligned and isn’t fully inserted into one of the holes on the 

spool, the vertical position isn’t locked and the TV could free fall down the column or 

spring upwards, resulting in damage to the TV or personal injury.
Warning! The degree of the lift strength that you set the STNDMTV70 to depends 

upon the weight of the TV. Every time that you take a TV off of the STNDMTV70 and 

add a different TV, you must counterbalance the weight of the TV again.

Attach the plastic cover

Caution! Exercise caution when you assemble the plastic cover because the tabs on 

the plastic cover can be broken off easily if you use excess force during assembly.

1.  Carefully separate the two halves of the plastic cover. (

figure 20

)

figure 20

Plastic cover

Tab

Содержание STNDMTV70




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды