manualshive.com logo in svg

StarTech.com STNDMTV70, Руководство по установке

Поделиться
Скачать
StarTech.com STNDMTV70 Скачать руководство пользователя страница 27

Instruction manual

21

Attach the adapter brackets to a flush mounting surface

To accommodate different TV designs, the STNDMTV70 comes with five sets of screws 

of different lengths and diameters, TV washers with two hole sizes, and two sizes of 

spacers.
Warning! Make sure that the weight of the TV doesn’t exceed the weight capacity of 

this product. If you exceed the weight capacity, you might experience personal injury 

or damage to the product.  

This product can support the following weight: 8 to 30 kg (18 to 66 lb.).

1.  To select the combination of mounting hardware that you need to use to attach the 

adapter brackets to the TV, complete the following:

•  Determine the depth of the mounting holes on the TV.
•  Determine the diameter of the mounting holes on the TV.

Note: If you’re using a TV with a flush mounting surface, you don’t need to use any of 

the provided spacers.
2.  Position the adapter brackets so that the hooks on the adapter brackets are pointed 

towards the bottom of the TV and are aligned with the mounting holes on the back 

of the TV.

3.  Depending on the screw size that you’re using, place the TV washers so that either 

the small or large holes are positioned over the adapter brackets.

4.  Insert the M5x14 mm screws or the M6x14 mm screws

 

through the TV washers, 

adapter brackets, and into the back of the TV.

5.  Use a Phillips type screwdriver to tighten the screws. (

figure 14

)

Warning! Do not over-tighten the screws. If you encounter resistance while you’re 

tightening the screws, stop tightening. Failure to do so could result in damage to  

the TV.

Содержание STNDMTV70




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды