9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
3.
Type
Telnet
followed by the
IP Address
of the
Splitter
and press
Enter
. The default
IP Address
of the
Splitter
is
192.168.1.50.
4.
Enter the commands found in the
section.
Serial and Telnet Commands
Command
Function
help
•
Show the full command list
help N1
•
Show the help details for command N1
•
N1 = {Command name}
get model
name
•
Show the
Splitter
model name
get fw ver
•
Show the
Splitter
firmware version
set update
mcu
•
Set
Splitter
Firmware Update
set factory
default
•
Factory Reset
set ip mode
N1
•
Set
IP Address
mode
•
Available values for N1:
•
0 [Static IP Mode]
•
1 [DHCP Mode]
get ip mode
•
Show current
IP Address
assignment
mode
