7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Firmware Updates
To update the
Firmware
or perform a
Factory Reset
select
the
Settings
tab then the
System
tab. Select
Update
for a
Firmware Update
and
Reset
for a
Factory Reset
.
Network Information
To check the
MAC Address
, and to change the
IP Mode
,
IP
Address
,
Subnet Mask
,
Default Gateway
, and
DNS Server
Address
, select the
Network
tab and make the appropriate
changes.
Note:
When the
IP Mode
and/or
IP Address
are reset the
Splitter
will automatically disconnect. The
Splitter
must be
reconnected by selecting the
ID Name
of the
Splitter
.
EDID and HDCP Settings
To adjust the
EDID
and/or
HDCP Settings,
or to view the sync
status of the
HDMI Source Device
, select the
Input
tab and
select the appropriate settings under the dropdown menus.
Select
Save
to save the new settings. Alternatively, click
Save to
All Units
to apply the changes to all of the connected
Splitters
.
Volume Adjustment
To control the volume of the
HDMI Display Devices
select the
Output
tab then select the
Audio Icon
and adjust the volume
to the desired level.
Serial Control
1.
Connect to the
Splitter
using a third party
Serial Client
.
2.
Enter the commands found in the
section.
