Instruction manual
1
Introduction
The SATSASTRX25 provides a convenient and fast way to hot swap drives with the
StarTech.com
and the
. This means that you
can exchange the drives while the backplanes are still running.
You can use the SATSASTRX25 as an extra tray to create expandable storage or as
part of a rotating backup solution. The drive tray supports both SAS and SATA 2.5 in.
drives, ranging in height from 5 to 15 mm. To maximize the performance of your drives,
the single and four-bay backplanes support SAS II and SATA III, enabling file transfer
speeds up to 6Gbps when paired with a compatible controller.
Packaging contents
• 1 x 2.5 in. hot-swap drive tray
• 4 x screws
• 2 x keys
System requirements
• 2.5 in. SAS or SATA drive
• A screwdriver
• Supported drive heights include 5 mm, 7 mm, 9.5 mm, 12.5 mm, and 15 mm
• Designed to be used with StarTech.com products
and
The SATSASTRX25 is OS independent and doesn’t require any additional drivers or
software.
System requirements are subject to change. For the latest requirements, please visit
