Instruction Manual
2
HHaarrddw
waarree GGuuiiddee
Rear Panel
A
C
F
D
B
E
A
A
Retaining Screw
B
40mm Cooling Fan
C
DC Power Port
D
Power Switch
E
eSATA Port
F
USB Port
IInnssttaallllaattiioonn
Installing a Drive in the Enclosure
1. Loosen the Retaining Screws, on the rear panel. Please note that these screws do
not need to be removed, rather loosened enough to allow the Hard Drive Tray to slide
out from the enclosure.
2. Slide the Drive Tray out from the Enclosure.
WARNING:
Hard drives require careful handling, especially when being
transported. If you are not careful with your hard disk, lost data may result.
Always handle your hard drive and storage device with caution.
WARNING:
Hard drives, like all computer equipment can also be severely
damaged by static electricity. Be sure that you are properly grounded before
opening your computer case or touching any components. StarTech.com
recommends that you wear an anti-static strap when installing any computer
equipment. If an antistatic strap is unavailable, discharge yourself of any static
electricity build-up by touching a large grounded metal surface (such as the
computer case) for several seconds.
