3
Installation
WARNING:
Hard drives require careful handling, especially when
being transported. If you are not careful with your hard disk, lost data
may result. Always handle your hard drive and storage device with
caution.
Enclosure Installation
1. Remove the drive trays from the enclosure, by pressing the release
button, then pushing down on the arms to eject them and slide the
trays out.
2. Remove the screws holding in the plastic brace from the tray, then
secure the hard drive into the trays with the previously removed
screws. Repeat for each hard drive tray.
3. Slide the trays back into the enclosure until they are fully seated,
then close the arms.
4. Plug in the power adapter and press the power button on the front.
*installation photos are for reference only
