Instruction Manual
2
Installation
WARNING!
Hard drives and storage enclosures require careful handling,
especially when being transported. If you are not careful with your hard disk,
lost data may result. Always handle your hard drive and storage device with
caution. Be sure that you are properly grounded by wearing an anti-static
strap when handling computer components or discharge yourself of any
static electricity build-up by touching a large grounded metal surface (such
as the computer case) for several seconds.
Hardware Installation
1. Open the enclosure casing by removing the four small screws on the bottom side
and removing the bottom panel.
2. Insert the mSATA drive into the slot connector at an angle. Make sure to properly
line up the notch in the slot connector with the notch on the mSATA drive
connector.
3. Once the mSATA drive is fully inserted into the slot, push the drive back against
*photos/screenshots are for reference only
