3
Using the provided USB 3.0 micro-B cable, connect the enclosure to
5.
an available USB port on the computer system. This cable can be
connected to any type of USB type A port, not just USB 3.0 ports.
NOTE:
A USB 2.0 micro-B cable can also be substituted for the USB3.0
cable, but will not allow for USB 3.0 speeds, if connected to a USB 3.0
port.
NOTE:
Only the Primary connector is required
to be plugged into the computer system. The
Secondary connector may be required if the hard
drive cannot draw enough power from a single
port (i.e. USB 2.0 ports).
Driver Installation
No driver installation is required for these operating systems, as this
enclosure is natively supported, so the drivers are already installed.
Verifying Installation
Windows 2000/XP/Server 2003/Vista/7
From the main desktop, right-click on “My Computer” (“Computer” in
Vista/7), then select Manage. In the new Computer Management window,
select Device Manager from the left window panel.