Instruction Manual
2
Installation
WARNING!
Hard drives and storage enclosures require careful handling,
especially when being transported. If you are not careful with your hard disk,
lost data may result. Always handle your hard drive and storage device with
caution. Be sure that you are properly grounded by wearing an anti-static
strap when handling computer components or discharge yourself of any
static electricity build-up by touching a large grounded metal surface (such
as the computer case) for several seconds.
Hardware Installation
1. Use the provided screw driver to remove the 4 screws from the outside of the
enclosure (2 screws on either side).
2. Slide the drive tray out from the enclosure. The tray slides out from the USB
connector side.
3. Insert the 2.5in SATA drive into the drive tray furthest from the connectors. Slide the
SATA drive towards the SATA drive connector until firmly connected.
*installation photos for reference only
