StarTech.com RK12WALLO, Инструкция по эксплуатации

Страница: 10 / 14

Instruction manual
5
Package contents
• 48 x M6 screws
• 48 x M6 cage nuts
• 48 x washers
• 16 x assembly screws
• 2 x vertical rails
• 2 x horizontal brackets
• 1 x instruction manual
Requirements
• Phillips type screwdriver
• Appropriate tools and mounting hardware for the type of wall you’re using
Requirements are subject to change. For the latest requirements, please visit
www.StarTech.com/RK12WALLO .
Assemble the RK12WALLO
It requires two people to assemble the RK12WALLO.
1. Place one of the vertical rails inside one of the horizontal brackets and line up the
assembly holes.
2. At the front of the horizontal bracket, use a Phillips type screwdriver to insert two
of the assembly screws through the horizontal bracket and into the vertical rail.
Tighten the screws in place.
3. At the side of the horizontal bracket, use a Phillips type screwdriver to insert two
of the assembly screws through the horizontal bracket and into the vertical rail.
Tighten the screws in place.
4. Repeat steps 1 to 3 to attach the second vertical rail to the horizontal bracket.
5. Place the other horizontal bracket over the ends of the vertical rails and line up the
assembly holes.