18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Mount the enclosure to the wall
Warning!
Remove all equipment from the enclosure before
you attempt to mount the enclosure to the wall.
Wall structures vary and it is important to make sure that the
type of wall structure and mounting hardware that you are
using will properly support the mounted equipment. Failure
to do so might result in personal injury and/or equipment
damage. The wall structure should be capable of supporting
at least four times the weight of the mounted equipment.
The RK1232WALHM weighs 99 lb. (45 kg) and can hold up to
198 lb. (90 kg) in weight.
Warning!
If you lack the necessary expertise to attach this
product to the wall that you’re using, contact a construction
professional to install the enclosure or to provide specific
mounting instructions for your wall structure.
The number of mounting holes on the rear door of the
enclosure will vary depending on the model of your enclosure.
Each mounting hole can accommodate an M8, M10, 5/16”, or
3/8” bolt.
•
Follow the appropriate steps for the type of wall that you’re
attaching the enclosure to and attach the enclosure to the
wall.
Caution!
The enclosure is extremely heavy and you should not
attempt to lift and hang the enclosure without the assistance of
other people.