15
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Replacing the Cable Covers
To put the cable access cover back on:
1.
Place the cover over the cable access opening
2.
Use a Phillips type screwdriver to insert the screws through
the cover and into the enclosure.
3.
Tighten the screws.
Reverse the front door
To accommodate different rack configurations, you can reverse
the front door of the enclosure so that it opens to the left or
right of the enclosure.
1.
In the top corner of the inside of the front door, pull the lever
down and move the top corner of the front door away from
the enclosure.
2.
In the bottom corner of the inside of the front door, pull the
lever up and remove the front door from the enclosure.