Instruction Manual
5
f) Using a small ratchet, or pliers (not included), replace both of the DVI-port standoff
screws by placing them into the standoff holes located on either side of the
DVI input-port.
g) The bracket has now been replaced.
2. Install the
PEXHDCAP60L
in your
computer system.
a) Turn off your
computer system
and disconnect any peripheral devices (i.e.
Printers, external hard drives, etc.). Unplug the power supply power cable from
the rear of the
computer system
.
b) Remove the case cover from your
computer system
(See documentation
included with your computer system for step by step instructions).
