StarTech.com PCISATA4R1, Инструкция по эксплуатации

Страница: 7 / 25

Windows 2000/XP
1. Windows will launch the Add New Hardware Wizard . Click Next .
2. Choose the Search for a suitable driver... option and click Next .
3. Check only the CD-ROM drives option. Ensure the installation CD is inserted in
the CD-ROM or other optical drive. Click Next .
4. Windows will display a message stating that “Windows has found a driver for this
device”. Click Next . Choose Yes or Continue Anyway if you are warned that the
driver file has not been digitally signed.
5. Windows will display a message that states “Windows has finished installing software
for this device”. Click Finish .
6. Windows will continue to detect and install any remaining new devices. If the Add
New Hardware Wizard is launched again, repeat steps 1 through 5 from above.
Windows NT 4.0
Consult the readme.txt file in the \SATAII 3Gbps_Raid_4Port\SiI3124\Win
XP_2000_2003_NT\Drivers folder on the installation CD for instructions on how to
configure the card for use in Windows NT 4.0.
Verifying Your Installation
Windows 98SE/ME
1. Go to Start > Settings > Control Panel .
2. Double click System .
3. Click the Hardware tab.
4. If the card does not appear with a red x or yellow exclamation point ( ! ) next to it,
Windows has not detected a problem with the installation and the card should
function normally.
Windows 2000/XP
1. Go to Start > Settings > Control Panel .
2. Double click System .
3. Click the Hardware tab and choose Device Manager .
4. If the card does not appear with a red x or yellow exclamation point ( ! ) next to it,
Windows has not detected a problem with the installation and the card should
function normally.
Instruction Manual
4