StarTech.com PCISATA4R1, Инструкция по эксплуатации

Страница: 6 / 25

IIn ns stta alllla attiio on n
This section will guide you through the installation of your PCI SATA RAID card. Please
read through the instructions carefully and complete each step in the order listed.
Please note: If you are installing the card in a low profile slot, remove the standard
size bracket and replace it with the included low profile replacement bracket before
completing these instructions. Also, please ensure that the PCI SATA RAID card is
not contacting any of the surrounding motherboard components.
Installing the Card
1. Make sure that your system is unplugged and you are grounded.
2. Remove the cover of your system (see your computer’s user manual for details, if
necessary) and gently turn your computer onto its side.
3. Locate an empty PCI or PCI-x slot (usually white in color) and remove the metal plate
that covers the corresponding rear bracket. You may need a Phillips screwdriver to
perform this step.
Retain this screw! You will need it to secure the card later.
4. Gently insert the PCI card into the empty slot, making sure it is firmly seated.
5. Secure the card in place using the screw you removed in Step 3.
6. Install your SATA drive(s) according to their installation instructions.
7. Put the computer case back on.
Installing the Drivers
Windows 98/98SE/ME
1. Windows will detect that new hardware has been installed and launch the Add New
Hardware Wizard. Click Next and choose the Search for the best driver for your
device (Recommended) option. Click Next . Ensure the installation CD is inserted.
2. On the next screen select only Specify a location . Choose Browse .
3. In the file selection box, double click folders under your CD-ROM in the following
order: SATA Raid_4Port > Sil3114 > Win98_me_2000_xp_nt4.0 > driver . Click
OK .
4. The file location box under Specify a location will now contain the path to the files.
Click Next .
5. The Wizard will inform you that “Windows is now ready to install the best driver for
this device...” Click Next . The Wizard will complete the installation. Click
Finish .
6. If the Add New Hardware Wizard appears again, repeat steps 1 through 5 above to
complete the installation.
Instruction Manual
3