Driver Installation
For detailed information, please refer to the document in the disk provided.
Examples:
1. For NetWare client, please execute the following:
lsl
pciodi
ipxodi
netx or vlm
f:
login username
2. For NetWare server, execute the following:
load pcisrv
bind ipx pxisrv
load monitor
Boot Rom Installation (Optional)
The PCICOMNO card provides a socket for a remote boot ROM. With a boot ROM, a
host computer can load the operating systems over the network.
1. Plug in the boot ROM to the appropriate position, make sure the direction is correct.
2. Enable the boot ROM function. Please see the Setup program for details.
AUI Bracket Installation (Optional)
You can buy another bracket containing an AUI connector from your dealer.
1. Hook up the cable to the connector pins market “AUI”. Make sure the red line on the
cable is positioned in the “pin 1” location.
2. Secure the bracket to the PC.
Troubleshooting
The most common factors that cause an adapter to fail are configuration conflicts and
cabling problems. PCI cards shouldn’t have any conflct problems due to Plug and Play
specifications. One should check the cable and its terminator. Also, use the adapter LED
indicators and diagnostic program. For information on the Diagnostic Program, please
see the Setup program. If the problem presists, call your dealer for help.
LED Indicators
The LEDs help you monitor the network status. Their functions depend on the type of
cable used.
*Link
monitors the data link status on the UTP cable. It turns ON when there is data
linked, and OFF when there is a bad connection.
*Activity
blinks when there is data transmission/reception.
3
