StarTech.com PCI511WB, Инструкция по эксплуатации

Страница: 16 / 22

14
Appendix B: Setting Up A Wireless Ad Hoc Network
To install an Ad Hoc network, you need two computers and two wireless adapters.
Follow the instructions below to set up an Ad Hoc network between your two adapters,
using the product Quick Install or Instruction Guides for details when necessary.
1. Install your PCI511WB network adapter, drivers, and utility program to your
computer using the instructions provided in the Quick Install guide.
2. Install your second 802.11b wireless adapter, drivers, and utility program to your
other computer using the instructions provided in the Quick Install guide.
3. Using your configuration utility, set each adapter to Ad Hoc mode and make sure
that both adapters are on the same Channel and have the same SSID (see
Configuration on page 5 and 6 for details).
4. From your operating system software, make sure that the IP addresses assigned to
each computer are in the same range as (but not identical to) each other and
that the computers use the same subnet mask. Check with your operating system
vendor for information on setting up networking and file sharing.
For example, if your first computer has an IP address of 192.168.0.2 and a subnet
mask of 255.255.255.0, your second computer could be assigned an IP address of
192.168.0.3 with a subnet mask of 255.255.255.0.
5. When you have installed all the proper components, use the instructions on your
Quick Install or Instruction guide to connect your two devices.