Instruction Manual
6
PUSBADAP/PUSBADAPLP Only
This section details how to install PUSBADAP as a stand alone card.
1. Remove the computer cover. For more detailed instruction on how to perform this
step, please refer to the documentation that was included with your computer at
the time of purchase.
2. Connect one end of the 9-Pin USB Header Cable (provided) to the USB IN connector,
denoted as J1: USB Input Connector (from Host USB port) (see diagram, pg.3) on the
PUSBADAP board.
3. By default, JP2 is set to INT, commanding the card to draw power from the
computer power supply. As such, insert an LP4 power connector from the power
supply, into the AUX Power Connector.
If JP2 has been set to EXT, the PUSBADAP will draw power through the External
Input Power DIN Connector.
4. Connect the remaining end of the 9-Pin USB Header Cable (see step #2), to the
USB Header connector on the host motherboard. For further instructions on how
to locate the appropriate connection on the motherboard, please consult the
documentation that was included with your motherboard/computer at the time of
purchase.
Software Installation
PCI312PUSB/LP and PEX312PUSB/LP are natively supported by Windows® XP (SP2)
2000 (SP4) and Vista™. As such, no driver installation is required, as long as the
necessary updates have been made to the operating system(s).
For Windows 98SE or Windows ME installations, however, driver installation is required.
To install the drivers necessary for PCI312PUSB/LP or PEX312PUSB/LP to function
properly:
1. With the host computer powered on, insert the Driver CD that accompanied your
purchase of PCI312PUSB/PCI312PUSBLP into the CD/DVD-ROM drive.
2. On the Driver CD, browse to the 2. X:\USB 2.0\NEC folder, (where X de notes the
designated CD/DVD-ROM drive on the host computer) and locate the folder that
corresponds with the host computer operating system.
3. Open the appropriate folder and locate the 3. U2v2_1 application file. Execute the
file by double clicking on the icon/listing, to begin installation.
4. Follow the installation through until you are asked if you would like to reboot the
computer. Select
Yes, I want to restart my computer now
and click on
Close.
Once the computer has rebooted, the operating system will detect the presence of
the card - installation is complete.
