Instruction Manual
5
7.
PCI312PUSB/PEX312PUSB:
By default,
JP2
(see pg. 3) is set to
PCI
. The card
will draw power via the PCI/PCI Express slot into which it is installed; as such, if
you’ve left the
JP2
jumper in the default position, there will be no need to connect
PCI312PUSB to the computer power supply.
If
JP2
has been switched to
INT
(Internal), you must connect PCI 312PUSB/
PEX312PUSB to the computer power supply, by inserting an available LP4 connector
into the
AUX Power Connector
.
PUSBADAP:
By default,
JP2
is set to
INT
, commanding the card to draw power from
the computer power supply. As such, insert an LP4 power connector from the power
supply, into the AUX Power Connector.
If
JP2
has been set to
EXT
, the PUSBADAP will draw power through the External
Input Power DIN Connector, and will require an external power source (see http://
www.startech.com for accessories).
8. Once both cards have been properly positioned, and the necessary link has been
made between them, close the computer case and power on the computer.
PCI312PUSB/LP or PEX312PUSB/LP Only
This section details how to install PCI312PUSB/PEX312PUSB as a stand alone card.
1. Remove the computer cover. For more detailed instruction on how to perform this
step, please refer to the documentation that was included with your computer at
the time of purchase.
2. Locate an empty PCI/PCI Express slot and remove the metal bracket covering the
accompanying empty port/socket.
3. Position the card above the open PCI/PCI Express slot, ensuring that the card is
properly aligned with the slot. Insert the card firmly into the slot, distributing
force evenly across the length of the board, then fasten the metal bracket to the
computer case (using the screw removed in step #2, if necessary).
4. By default,
JP2
(see pg. 3) is set to
PCI
, commanding the card to draw power via the
PCI slot into which it is installed. As such, if you’ve left the JP2 jumper in the default
position, there will be no need to connect PCI312PUSB to the computer power
supply.
If
JP2
has been switched to
INT
(Internal), you must connect PCI312PUSB to the
computer power supply, by inserting an available LP4 connector into the
AUX
Power Connector.
5. Once the card is properly seated, and secured to the computer case, close the
computer case and power on the computer.
