StarTech.com ISA2S550, Инструкция по эксплуатации

Страница: 5 / 10

3
Installation
This section will guide you through the installation of your ISA card. Please read through
the instructions carefully and complete each step in the order listed.
NOTE: If you want to configure your card in a manner that is different from the default
you will need to adjust the jumpers before installing the card. See “Setting The Jumpers”
on page 4.
Installing the Card
1. Make sure that your system is unplugged and you are grounded.
2. Remove the cover of your system (see your computer's user manual for details, if
necessary) and gently turn your computer onto its side.
3. Locate an empty ISA slot (usually black in colour) and remove the metal plate that
covers the rear bracket. You may need a Phillips screwdriver to perform this step.
Hang on to the screw!
You will need it to secure the card later.
4. Gently insert the card into the empty slot, making sure it is firmly seated.
5. Secure the card in place using the screw you removed in Step 3.
6. Put your computer case back on.