Disconnecting the Enclosure from a Computer
1. Ensure that any programs that have accessed the drive are closed.
2. Ensure that the LED on the front of the enclosure is not flashing red, which indicates
the drive is being accessed.
3. Switch the power button marked
I O
on the rear panel of the enclosure to the Off (
O
)
position. The LED will no longer be lit.
4. You can now safely remove the USB 2.0 data cable from the enclosure.
Specifications
Instruction Manual
4
Drive Compatibility
ATA/33/66/100/133 EIDE
3.5” drive form factor supported
Data Transfer Rate
480 Mbits/sec. (maximum) when connected to a USB 2.0 controller
(Actual transfer rates may vary depending on drive model and configuration)
Drive Cooling Mechanism
8 cm. fan with side and rear venting
Power
Adapter Input: 100-240V AC (auto-switching) 50/60Hz, 0.55A
Adapter Output: 12V DC, 2A, Center Positive
Certifications
CE (Enclosure)
FCC Class B, CE, UL, CB (Power Adapter)
Содержание InfoSafe IDECASE35U2
Страница 10: ...Revised 18 April 2005 Rev A...