Configuration: Adapter Name (Default : Serial Adapter)
To change the device name:
1. Highlight
Local Device Name
.
2. Enter the chosen device name in the text box provided
(length <= 31 alphanumeric characters), for example,
“Bluetooth to Serial Adapter”.
3. Press the
Save
Button to retain settings, followed by the
Disconnect
button.
Automatic Connection:
Connect the Bluetooth to Serial Adapter to an RS232 device
(e.g. a Modem).
Push the
MODE
button to change from Configuration mode
to DATA mode. The MODE LED will shut off. This will initiate
an automatic connection. In the following instructions, the PC
Dongle will set up the wireless link with your Bluetooth to
Serial Adapter automatically, and the Bluetooth LED
(blue color) on the Bluetooth to Serial Adapter will become lit.
As an example, if there is a remotely configured Bluetooth to
Serial Adapter DTE Adapter connected to an RS232
modem, and its paired device is a USB Bluetooth Dongle
connected to your PC, you can then use the PC to wirelessly
control the operations of the remote modem.
A
Ap
pp
plliic
ca
attiio
on
n
The following example illustrates how to transfer files between a barcode scanner and
PC using a Hyper-Terminal program. The Barcode scanner has a Bluetooth to Serial
Adapter attached and the PC is using a USB Bluetooth Dongle. We still keep their pairing
PIN code to be “1234”.
Bluetooth MAC addresses :
Bluetooth to Serial Adapter: 000272463b86 (in Master state).
USB Bluetooth Dongle : 000a3aa09bad (in Master/Slave state).
1. Configure your Bluetooth to Serial Adapter by local or remote settings as described in
the corresponding instructions.
2. Pair the Bluetooth to Serial Adapter and USB Bluetooth Dongle by USB Bluetooth
dongle bound software, such as Widcomm, IVT, or Microsoft Windows XP SP2
embedded drivers.
Instruction Manual
9
