6. You will be asked to input the Bluetooth to Serial
Adapter PIN code. If this is the first time the adapter
is being configured, the PIN code is set to factory
default as “1234”. As such, enter “1234” in this step.
If the PIN code was previously configured, the
most recent PIN code must be entered. Click
Next
to
continue.
Please note
: If your PIN code is not correct, the
Bluetooth devices will not pair together. Bluetooth to
Serial Adapter default PIN code is “
1234
”. If you had
modified it before and forgot the PIN code, please reset
your Bluetooth to Serial Adapter and follow the
aforementioned steps to configure the PIN code.
7. Windows will then verify your PIN code. If the PIN code is
correct, the Bluetooth to Serial Adapter and USB Bluetooth
Dongle will pair together, and the Bluetooth LED (Blue color)
will become illuminated. Click
Finish
to complete pairing.
8. To determine the COM port to which the Adapter is assigned,
please select the
COM Ports
tab
Please note
: If you want to check the Bluetooth to Serial
Adapter MAC address, you can click the Bluetooth to Serial
Adapter and select the
Hardware
tab. Click on
Properties
to
display the MAC Address.
9.To locate the USB Bluetooth Dongle MAC address:
Select
Generic Bluetooth Radio device
on the Hardware
tab, and click Properties as shown in the picture on the right.
The Generic Bluetooth Radio Properties page will pop up.
Click on the
Advanced
button, to display the USB Bluetooth
Dongle MAC address
Instruction Manual
7
